Din Rail Breadboard Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are din rail breadboard mounts for 400 and 830 points breadboard.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 179
- Wydruki
- 0
- Wyświetlenia
- 1168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are din rail breadboard mounts for 400 and 830 points breadboards. The
din rail clips can be attached temporarily to the breadboard base using a
piece of 1.75 mm filament. The clips can be attached horizontally or
vertically to the breadboard base. They can also be glued to the breadboard
base for a permanent setup. Clips shall be printed on their side. The 830
points Breadboard base needs two clips.
Support material is not required. An infill of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/din-rail-breadboard-mounts/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.