Monster Scream Mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screaming Monster mask for Halloween. Works well for kids and adults alike.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 124
- Wydruki
- 1
- Wyświetlenia
- 767
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Could and should be combined with see-through cloth for the eye sockets and mouth, and painted. Teeth are optional, but included as a separate stl – should printed with the pointy things up. I glued them in place with a hot melt glue gun. Simple strap fasteners also included in a separate stl.
I printed the mask standing upside-down with strong tree supports and support for PLA material, tilted slightly. That yielded a 7h30m print time on the X1C. Without switching back and forth to support material it'll print a lot faster. The standing print may or may not work for you, depending on your setup. It does run the risk of falling over, especially if you use a separate support material which may not bond enough to keep the mask steady. So if you do print it upright, with a weak bonding support material, be sure to generate enough supports to hold it in place.
Please share pictures if you print and adapt it.