Cosplay Hairband System (CHS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We have and are making various cosplay hair related accessories which support attachment to these headbands.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 342
- Wydruki
- 2
- Wyświetlenia
- 1470
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
These are hairbands which support attachment to various hair accessories which we have and are currently designing.
There is currently one size available but if there is demand I can add more.
Widths
There are two widths available:
Normal Width is 1cm thick the whole way around: | Tapered Width is 2cm thick at the top and tapers down to 1cm at each end. This band is stiffer and stronger: |
 |  |
Accessory Gaps
There are two different accessory gaps available which offer different gaps between your head/hair and the accessory, which may be useful depending on how much hair, if any, should go under the accessory:
Narrow Accessory Gap puts the accessory as close to your head as possible: | Large Accessory Gap puts a roughly 1cm gap between your head and the accessory: |
 |  |
Accessory Placements
There are different accessory placements available. This is explained by looking at the band and imagining it is a clock, and the accessory on the right is at that time, with the other at the same level on the other side.
Supported Accessories
The following cosplay hairbands are available:
There are some non-cosplay accessories also:
More will arrive as motivation comes…
Printing
It might be worth printing the hair band in a transparent material if possible to make it easier to hide the hair band. I used a 0.4 nozzle with a 0.2mm layer height for everything.
Please check to ensure the tapered width variants are oriented correctly - one end of the clip supporting the accessory should be on the print bed.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨