Siemens Vida MRI Paper Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The paper holder of the Siemens Vida 3T MRI. Replacement part, as the original breaks easily.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 521
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- GNU General Public License v3.0
This is a replacement for the Siemens Vida MRI paper holder.
Image: Left: Original in white, already broken; Right: Printed part in black PLA, fitted into the original railing piece
The original breaks easily and often, but repair is very expensive, requiring the purchase of multiple parts at once and paying a Siemens MRI technician to repair. As the paper holder is absolutely not relevant for patient safety or the correct functioning of the MRI, there should be no problem replacing it with a 3D printed part.
Update 2022-12-19
Over one and a half years later, none of the 3D printed replacement parts have broken so far, which is a new record compared to the original piece. One was printed in PLA and one in PETG.
Assembly instructions
After printing tap the two holes with an M5 screw tap.
Feel free to give feedback and share your thoughts on this replacement part. The FreeCAD source file is attached so you can modify the part to fit your exact model of Vida MRI.