Another Parametric Magic: The Gathering Deck Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A revisit to my previous parametric deck box that no longer requires any magnets.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 1184
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a redesign of my previous Magic: The Gathering parametric deck box that no longer requires magnets. The files uploaded were designed with dragon shield single sleeved cards in mind. All test prints were done at 0.28mm layer height with a 0.4mm nozzle. I have not tested other layer heights but the fit quality should not change much. If your printer struggles at the default clearances, use a knife to shave down the retaining nubs for a better fit without having to reprint the model.
STLs provided for 60, 75, and 100 card decks.