Bottle dryer stand for SodaStream bottles or thermoses
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bottle dryer stand with a plate for SodaStream bottles or thermos bottles
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is divided into two parts, the bottle holder itself and a plate where the water can collect. The plate can be printed if necessary (I find it very useful).
The dry-stand can be used for SodaStream bottles and also for slim thermos bottles.
The top opening is 70mm in diameter and tapers to 60mm within 2cm. This fits a broad range of bottle shapes.
I printed it in PLA+. PETG should be used if you want to clean the parts in the dishwasher.
For the stand, I took an infill of 25% and 4 wall loops. This gives the model a good weight and stability. Three wall loops may also be enough. The bottle stand must be printed upside down. No support is necessary.
For the plate, I took a circular pattern for all surfaces because it is perfectly round. This fits well to the part and the printing goes a little faster.
I would love it if you like it and would appreciate feedback and makes.