1 / 1
608 Bearing Adapter for  Airbrush and Painting Turntable — zdjęcie 1

608 Bearing Adapter for Airbrush and Painting Turntable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to fit 608 Skateboard Bearing

Ocena
5 / 5
Polubienia
51
Pobrania
438
Wydruki
6
Wyświetlenia
1842
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

I only had standard 608 (skateboard) bearings so this is an adapter to make them work with the original file.
 

The smaller collar is to fit around the peg on the bottom section.

Printed at 0.2mm layer height, 25% Grid infill, no support or brim necessary.