Lithium coin cell CR2032, CR2035 storage - Honeycomb wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a small slotted storage for lithium coin battery. CR2025, CR2032, CR2035
- Ocena
- 4,667 / 5
- Polubienia
- 27
- Pobrania
- 95
- Wydruki
- 3
- Wyświetlenia
- 490
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Inspired by the honeycomb box. They have the same height as the small box from Honeycomb box but they have a slightly bigger footprint to fit the cells. As shown in the picture, you can still put one next to a bigger box. I haven't tried placing 2 next to one another but I don't think they will fit properly.
The CR2032 is the one I used but you can print the CR2035 and any other cells with a smaller height will fit. They fit 10 cells.
I printed the casing upright on the thinner side and the drawer on the flat side without support or brim. It's around 15 grams.
