Jaguar windshield connector replacement for part #GJA8969AB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The picture shows the colored PLA for test, the original part on top and the ASA connector in black in the middle Then…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The picture shows the colored PLA for test, the original part on top and the ASA connector in black in the middle
Then a pictures with the support and brim on the model then last picture are once cleaned.
No real position found to print, make sure to add support and reduce the support for “plate only”, otherwise, the tube will be filled with support material.
Deburring and hand turning a larger drill bit into the hole tip to clean is probably required once printed.
High UV and heat resistance filament required.
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Infill:
100
Filament:
bambu asablack
Notes:
Uv and heat resistant material required
Category: Automotive