Pittsburgh Jack Pad Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cover that protects the jack pad and the other surface to prevent scratches
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple jack pad cover that slips over the pad of the jack to prevent scratching up the jack and your car.
Print with TPU or something else that is flexible so that you can squeeze it on. 95A worked well for me and stood up to the abuse of jacking up my car. I printed the thin one without any supports and didn't really have any issues with the bridging (I also didn't care how gross the bottom was because you can't see it). I recommend printing with a high level of infill and using concentric fill for the top and bottom to try and prevent tearing.
It is designed to fit this jack: https://www.harborfreight.com/3-ton-low-profile-floor-jack-with-rapid-pump-slate-gray-70482.html but might fit others, I am not too sure.
Source files are included if you want to modify them. I first designed the thick one but wanted to use less filament so I then only printed the smaller one which worked well.