Belt Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hanger for your belts. 6-slot variant is staggered and in-plane for easy belt removal.
- Ocena
- 4,818 / 5
- Polubienia
- 109
- Pobrania
- 811
- Wydruki
- 13
- Wyświetlenia
- 2258
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Couldn't find exactly what I wanted, so I made it. Basically a simple belt hanger that had six slots while keeping the belts offset and in plane. I may add some variants in the future with fewer slots or other changes.
-- 04.21.20206: Added updated version to address belts slipping off. I'll be adding further alternate versions in the future as well. --
Printed on An AnkerMake M5C-B in GreyBlue Hatchbox PETG using ~32g filament in 54min 45sec with the following settings: 0.4mm nozzle, 0.25mm layers, 50% triangle infill, no supports, stock PETG profile, 100mm/s initial, 200mm/s print & infill, 500mm/s travel, 5000mm/s acceleration.