1 / 6
Sliding Door Stopper for Top of Door — zdjęcie 1
1 / 6

Sliding Door Stopper for Top of Door

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Doorstopper that sits on top of the door. It slides across the length of the door to change the angle of the open door.

Ocena
0 / 5
Polubienia
6
Pobrania
39
Wydruki
0
Wyświetlenia
359
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This doorstopper “clips” onto the top of the door rather than wedging underneath it. It can slide back and forth across the length of the door to adjust the angle of the gap. The closer it is to the hinges, the more open the door. If you need to close the door all the way, just flip the stopper around and it will shut fully. The benefit of this design is that it stays with the door- it is not another loose item in the house. It also stays clean because it doesn't touch the ground at all. 

There is a 1 3/8"  and 1 ¾" version, which are standard door thicknesses. If needed, you can easily scale the model in the slicer to fit any non-standard door sizes.

Prints without supports on the flat face. It works well with hard materials like PLA or PETG, but print in something flexible like TPU if you are worried about damaging the door and/or door frame. 

Tagi