herbs pot - mount or hang up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
the pot is mountable or for hang up and fits almost inlays with a diameter of 130mm and and height of 130mm
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
The design is made for inlays with a max diameter of 130mm at a max. height of 130mm. Of course the size of the pot can be increased by settings in Prusa Slicer.
A small hole in the bottom ensures that your herbs will never feel like living in a swimming pool.
You can mount the pot easily by attached hanger to any wall or wooden construction and it is still flexibel to have it shortly in the kitchen for cooking. Afterwards just hang it up again.
If you don't want to have it fixed mounted you can use hanger_1 which allows you to hang it up everywhere you want. Just fix the hanger_1 by M3 screw and it is mobile where ever you want to hang it up.
The pot can be print easily in PETG or other filaments. For print settings feel free to print your own sample. My recommendation is to print the pot in a transparent filament with max 2 lines to make infill e.g. Gyroid visible.