Miss Minutes 1893 Clock (Loki)

Fan Art Clock of Miss Minutes, a character in the television series Loki produced by Marvel Studios. You can use the clock as a wall clock and as a table clock. 

The clock has a size of about 155 mm x 170 mm x 26.8 mm. The dial has a diameter of about 121 mm and a thickness of 4 mm. Movements (clockwork) with a case size of 56 mm x 56 mm can be used.

The 1893 variant of Miss Minutes was part of Loki - Season 2, Episode 3 :)

Other Variants of Miss Minutes

Normal Variant https://www.printables.com/model/630404	Ghost Variant https://www.printables.com/model/623069

Movement and Clock Hands

You can use any movement with a maximum case size of 56 mm x 56 mm x 20 mm. I use the following movement (Amazon DE): https://www.amazon.de/gp/product/B00TPI4FKE

The following movement should also fit (Amazon US): https://www.amazon.com/dp/B0B3CSGHTW

This movements have a thread length of 9 mm.

You can use the clock hands from your movement or use (and modify) the 3D modeled clock hands (see Files).

Printing

The clock is printed in 4 colors (light grey or white, grey or silver, black, white). 5 OR 4 color/filament changes are required. This depends on whether the body should be black (as in the series) or light grey/white.

Original look:  black ➝ light grey or white ➝ grey or silver ➝ black ➝ white ➝ black

• 00.00 - 23.20 mm: black
• 23.20 - 24.00 mm: light grey or white
• 24.00 - 24.60 mm: grey or silver (slightly darker than the second color)
• 24.60 - 25.40 mm: black
• 25.40 - 26.20 mm: white
• 26.20 - 26.80 mm: black

(The lighter grey layers at the edge can be painted over with a black felt-tip pen so that the entire body is black. In the pictures you can see the original look.)

Alternative look: light grey or white ➝ grey or silver ➝ black ➝ white ➝ black

• 00.00 - 24.00 mm: light grey or white
• 24.00 - 24.60 mm: grey or silver (slightly darker than the first color)
• 24.60 - 25.40 mm: black
• 25.40 - 26.20 mm: white
• 26.20 - 26.80 mm: black

The filament/color change using PrusaSlicer is described here: https://help.prusa3d.com/article/color-change_1687

Important: The dimensions given are the actual dimensions of the 3D model. Please check in your slicer preview whether the color changes are set correctly. The layers to be set for the color changes depend on the selected layer height.

Supports are only required for the hole for the movement shaft.

It is possible to work with variable layer heights to speed up the printing, for example:

• 00.00 - 23.00 mm: 0.3 mm layer height
• 23.00 - 26.80 mm: 0.2 mm layer height

Updates

• 2023-12-16: Upload STEP files

My Print Settings

• Printer: Prusa MK4 (0.4 mm nozzle)
• Rafts: No
• Supports: Yes
• Resolution: 0.3 / 0.2 mm (variable layer heights)
• Infill: 20 %
• Filament brand: Amazon Basics, Prusament
• Filament color: Light Grey, Galaxy Silver, Jet Black, White
• Filament material: PLA