Chess - Schach & Checkers - Draughts - Dame Board & Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this chess board to have also a box (or better 2 boxes) for the figures. I got some inspiration from…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 376
- Wydruki
- 1
- Wyświetlenia
- 2029
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this chess board to have also a box (or better 2 boxes) for the figures.
I got some inspiration from Kalcipher's board (https://www.thingiverse.com/thing:4782440), especially for the tiles.
To connect the "connectors" with the board, as well as aligning the cornerson the board, I used just some filament.
I printed everything using PETG, but PLA should works just fine as well.
Everything was printed without rafts or supports and with 25% infill, but I guess 15 should be also fine.
Part-list version 1 (the name already includes how often it has to be printed per color):
- CB_ChessBoard_2xperColor.stl
- CB_Connector_1x_perColor.stl or CB_Connector_4xperColor.stl
- CB_Corner1_1x.stl
- CB_Corner2_1x.stl
- CB_Corner3_1x.stl
- CB_Corner4_1x.stl
- CB_Tilex16_2xPerColor or CB_Tile_32xPerColor.stl
CB_Checkers_Draughts_Dame_1xPerColor.stl or CB_Checkers_Draughts_Dame_12xPerColor.stl Part-list version 2 (the name already includes how often it has to be printed per color):
CB_ChessBoard_V2_Part1_1xPerColor.stl
- CB_ChessBoard_V2_Part2_1xPerColor.stl
- CB_Connector_4xperColor.stl (Attention, only 2x per color needed)
- CB_Corner1_1x.stl
- CB_Corner2_1x.stl
- CB_Corner3_1x.stl
- CB_Corner4_1x.stl
- CB_Tile_x16_2xPerColor or CB_Tile_32xPerColor.stl
- CB_DualConnector_V2_1x.stl or CB_DualConnector_V2_4x.stl (decide for the color, since it connects 2 quarters of different colors...)
CB_Checkers_Draughts_Dame_1xPerColor.stl or CB_Checkers_Draughts_Dame_12xPerColor.stl I designed a second version, but did not print it, since I did print already the first one. The second version connects always two of the quarters of the board.
I hope you like it and I am happy to see some of your makes.
The chess figures that you can see on some pictures are not my design but the design of Jacob G. https://www.prusaprinters.org/de/prints/32741-chess-set-no-supports.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
25
Filament:
Prusament PETG Prusa Orange and Jet Black
Category: Chess