1 / 3
Tapo camera holder for AnkerMake M5C
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tapo camera holder for AnkerMake M5C, compatable with TP-Link Tapo cameras.
- Ocena
- 4,333 / 5
- Polubienia
- 31
- Pobrania
- 197
- Wydruki
- 3
- Wyświetlenia
- 1224
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (2)Kolekcje (36)Powiązane
Compatiable with AnkerMake M5C and TP-Link Tapo Cameras (C100, C110, C111, TC60)
| Recommended Material | PLA, PETG, or ABS |
| Infil | 20% |
| Additional Materials | Super Glue |
Assembly
You need to print the mount, and two of the pegs.
The pegs then need to be super glued to the mount, you will see two circular indentations on the front face which can be used as guides to position them.
If you are having trouble with the pegs, try slotting them into the camera base first, then glue it to the mount.
