Gridfinity bulk drill storage 1-16mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Bulk storage for drills sizes from 1mm to 16mm
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 527
- Wydruki
- 4
- Wyświetlenia
- 1843
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I had quite a assortment of spare drills 1-10 I had all in separate boxes per size. As I do some metalworking in stainless steel sometimes drills tend to be braking and it nice to have them fast when I brake one from my main set to refill.
I used the GridfinityGenerator Fusion 360 add-on from Lev Mishin to generate an empty gridfinity box then I designed the compartments. I added a round bottom and openings to easily grab de needed drills. The size of the drill is also printed on the pictures I find them unclear but in the workshop I find they are easy to read. A double colour print would be better but as I do not have a MMU and because I did not want the hassle of changing the colour mid print I left it this way.
I printed it in PETG, PLA is a possibility but the drills can be quite heavy so I thought PETG would be better. Printed with supports as prusa-slicer recommended this. I think you can print it without support but as the print contains quite some filament it would be shame to loose the print or quality and the support was only minimal. Further I used 0,2 layer height and 30% infill.