Dell Docking Station Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to fashion your dell docking station to the bottom of your desk or other location.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 265
- Wydruki
- 1
- Wyświetlenia
- 1812
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Howdy everyone! This is a basic little mount to attach your Dell Docking station to the bottom of your desk. Basically, screw the mount using your screws of choice (I prefer #6 - ¾"), use 2.5mm x 12mm screws to mount the locking tabs to the bottom of the docking station, then twist and lock. It's pretty easy and should mount decently tightly into place. If you have any questions, please reach out! I printed this in PLA Pro as I don't have good luck with PETG overall. PETG would probably be more sturdy, but the mount shouldn't take a ton of stress over all. Your call...
I used Polymaker PLA Pro, 20% infill, and just sent it.