Coffee filter holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A coffee filter holder for the 1/4 filters.
- Ocena
- 4,897 / 5
- Polubienia
- 157
- Pobrania
- 1153
- Wydruki
- 32
- Wyświetlenia
- 5081
- Oceny
- 29
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
You can for example attach it to the kitchen cabinet door (inside) or to the wall. I used a strong double-sided tape and it was perfect. The filter rack is designed for the 1/4 (aka. nr. 4) filters.
Update 23.3.2025: Added one additional model file that has a bit different image on it and it is engraved this time. Similar print settings can be used.
If you like my design, you can buy me a cup of coffee :) Thank you!
Print Settings
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20
Filament: Clas Ohlson PLA white
Notes: Probably a brim is needed when printing this thing. Supports are not needed if your printer can handle around 45 degree slope.