Scraperlite Plastic Razor Blade Handle V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for Scraperite plastic razors (Updated to V2)
- Ocena
- 4,82 / 5
- Polubienia
- 399
- Pobrania
- 3673
- Wydruki
- 64
- Wyświetlenia
- 10 810
- Oceny
- 50
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Remixed from the version uploaded by @ericsnis
Follow
Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides.
Images show it printed with:
- 0.2mm layer height
- Need supports under square holes under the blade + chamfered front edge
- eSun PLA+, matte
- Used 4 layers for wall thickness
- 15% Gyroid infill
The blades fit super tight as per the original model.
Created from STEP file for better resolution of curved features.
UPDATE (2023-11-03)
- Added 10mm to overall length (better ergonomics
- Changed the front edge angle for a lower approach angle as I needed a lower angle sometimes. This will mean added supports (see image below)
- Thumb indentation 1mm deeper and improved shape for better printing
- rounded off back corners.
- There are two versions. One with pockets for magnets (SCRAPERITE HANDLE_V2_MAG), one without (SCRAPERITE HANDLE_V2)
For magnets: I just used what I had on hand, which aren't very strong, but do the job. You can purchase it here: Aliexpress
Pause at layer 24 (if using 0.2mm layer height) or 2.6mm, insert magnets using double-sided tape then resume.
Supports: add to areas in green.
