1 / 3
VHB lift off hinges for Voron Trident or 2.4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VHB lift off hinge for 2 part doors on a Voron Trident or 2.4
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 327
- Wydruki
- 2
- Wyświetlenia
- 2107
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (2)Kolekcje (122)Powiązane
I really liked the original model but I didn't want to drill holes in my doors, so remixed them to use VHB tape. I've also used higher pin heights on the lower hinges to make putting the doors on easier.
Hardware wise you just need:
4 x M3 T-nuts
4 x M3x12 socket head screw
4 x 30mm 5mm pins
The holes for the pins are slightly oversized, I used PTFE tape to stop them coming out, I may fix this in a later update but that's how the original model is.