1 / 3
RealFilament spool cross for Anycubic filament holder — zdjęcie 1
1 / 3

RealFilament spool cross for Anycubic filament holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A nice cross for the new cardboard filament rolls from RealFilament. It's a tight fit, I made the cross a tad wider…

Ocena
0 / 5
Polubienia
0
Pobrania
26
Wydruki
0
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

A nice cross for the new cardboard filament rolls from RealFilament. It's a tight fit, I made the cross a tad wider than the hole, so a bit of pressure is needed. It let the roll just rotate and not dangling on the alu rod. Print two per roll. You might have to remove the red end cap on the rod to fit the cross.

Print Settings

Printer:

Anycubic i3 mega ultrabase

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

30%

Category: 3D Printer Accessories

Tagi