1 / 3
Gridfinity Filament Vacuum Seal Bags Accessories Holder — zdjęcie 1
1 / 3

Gridfinity Filament Vacuum Seal Bags Accessories Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 1x2x6 bin to hold a manual handheld vacuum pump (with rubber head/tip) and two sealing clips.

Ocena
5 / 5
Polubienia
14
Pobrania
50
Wydruki
3
Wyświetlenia
548
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Holds all accessories for “3D Filament Moisture Proof Storage Bags” purchased from Microcenter. Link to product:

https://www.microcenter.com/product/661750/leo-sales-ltd-3d-filament-moisture-proof-storage-bags-(10-bags-1-pump)

Made to full Gridfinity specs. Contains 6mm x 2mm magnet/screw holes and lip for stacking. Tolerences for holes are ~1mm (to allow for printing on machines with poor tolerances), so items drop into place easily, but are held deeply enough that they will not fall out.

Printed in ASA, 10% infill, 0.4mm nozzle, 0.2 layer height, 2 shells. 

Tagi