Bottle cage adapter and slider to bike frame or down tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
don't have a bottle cage mount on your bike frame or need secondary bottle cage? this is for you.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 315
- Wydruki
- 0
- Wyświetlenia
- 1528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
bottle cage adapter for mounting on bike frame, want to have a secondary bottle cage in your bike? no problem, you just need 2 m5x8 bolt, 2 m5 nut and cable ties/velcro strap. Can be used on any frame part even on down tube. If it is slippery and the adapter move side to side you can add double tape or rubber or foam, anything that make it not slippery.
there are 3 variant, with 4, 3 and 2 holes. you can use the 3 and 4 holes version as a slider on your main bottle cage mount. You can use velcro strap or cable ties. with 3.4 holes ver use 2 velcro, on 2 holes ver, use 1 velcro and 2 cable ties.
you can print it without support. 0.2 layer height.
Velcro strap:

Paracord strap


