Parkside 11-28 mm drill tip holder portapunte
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
semplicissimo supporto per le piunte parkside da 11 a 28 mm. è bello grosso quindi consiglierei una risoluzione di 0,3…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
semplicissimo supporto per le piunte parkside da 11 a 28 mm.
è bello grosso quindi consiglierei una risoluzione di 0,3 layer e riempimento 5% sennò ci vuole una vita a stamparlo e buttate via filamento per niente.
Con queste impostazioni mi ci sono volute comunque 13 ore e più di stampa e circa 220 grammi di filamento.
Brim bello largo obbligatorio (5-6 mm)
simple drill bit holder for Parkside drill tip from 11mm to 28 mm.
it's big, so i suggest 0.3 layer and 5% infill or it will be heavy, with large amount of filament and very very long time to print. set 5 or 6 mm of brim to prevent bottom curved surface.
with this set-up i spent more than 13 hours to print and about 220 gr. of filament.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.3
Infill:
5%
Filament:
Prusament PETG Grey
Notes:
Any material does the trick.
Category: DIY
