Creality K1 Filament Sensor Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy coupling/decoupling of the bowden tube in one click operation.
- Ocena
- 4,9 / 5
- Polubienia
- 434
- Pobrania
- 1674
- Wydruki
- 14
- Wyświetlenia
- 15 933
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mod is meant to make your life easier when you need to couple/decouple the PTFE tube.
Bill of Material
ECAS04 PTFE connector
M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping)
M3x6 mm FHCS threading screw (one of the screws holding the stock ptfe coupler)
Print Settings
Layer height : 0.15
Wall count : 4
Top/bottom layer : 5
Infill : 30%
No support
Material : PETG minimum if inside the chamber
Change Log
30 October 2023
First release
❤ Enjoy this model? Your support means the world to me! If you love what I do, remember to like and rate the model. You can also follow me to get the latest updates.
If you wish to further help me to fuel future projects, consider buying me a coffee, I'm literally running on those! Every cup counts and is immensely valued. ☕ Cheers!