1 / 2
MasterLiquid Atmos - Girl With Balloon by Banksy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bit of art for your Atmos :)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
Turn your Atmos pump into a unique work of art!

Printing instructions
- balloon.stl
- Nozzle size: 0.2
- Layer height: 0.2
- Perimeters: 2
- Color change: white → black on layer 5, black → red on layer 10
- Supports: printed with supports because balloon is hollow for better illumination
- cap_top.stl
- Nozzle size: 0.2 (0.4 will be ok too)
- Layer height: 0.2
- Supports: no needed but remember to flip model upside down
- cap_bottom.stl
- Nozzle size: 0.2 (0.4 will be ok too)
- Layer height: 0.2
- Supports: a lots of supports :)
Assembly instructions
- Place the middle part (balloon.stl) into the slot on the bottom cap
- Glue cap_top.stl on top
- Enjoy your artistic Atmos pump cap :)
@