Xbox Elite Series II Stick Locks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevent your Xbox Elite II from getting stick drift with a 20 minute 10 cent print!
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 225
- Wydruki
- 2
- Wyświetlenia
- 1132
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Prevent your Xbox Elite II from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift long term.
Print Settings
- Layer Height: .15mm Quality
- Infill: 5% (there is basically no infill)
- Supports: None
- Material: PLA recommended, this PLA works well for me¹
Design Notes
These are a modified version of my ROG Ally Stick Locks tuned to fit the Elite Series II better. You can add a material change during the print if you want the sides to be more clear with colors.
There are two versions, one has an Xbox Logo embedded, and the other does not. I use this to help identify the sticklocks for my different controllers. This logo is very small and can be difficult to print.
Other Versions
As the comments have found, these stick locks do work on other types of controllers, but I also have made versions tuned for other types of controllers:
Purchase on Etsy
If you don’t have a 3D printer, these are available on Etsy:
https://arcanelayers.etsy.com/listing/1774441680
1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!