Steampunk Train Whistle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a prop which I created for my daughter. It is based off an old train whistle and has been designed to hold a…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 164
- Wydruki
- 0
- Wyświetlenia
- 1613
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- GNU General Public License v2.0
This is a prop which I created for my daughter. It is based off an old train whistle and has been designed to hold a compressor blow-off tool in the body. The whistle uses compressed air to create a train noise and is triggered when the handle is pulled downward. The whistle is comprised of five prints which are assembled using 3mm screws and 4.2 mm. knurled insert nuts.
Hardware
M3 Brass Knurl Insert Nuts Metric Threaded
Outside Diameter: 4.2mm, Length: 5mm (See EBay)
Referenced Models
In order to create the whistle noise leveraged the work done by MikeP-NZ, published Apr 20, 2013 http://www.thingiverse.com/thing:77183
Category: Props