One way Gear Clutch for Motor Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to prevent brake torque when using the motor drive so I remixed this one way bearing.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 201
- Wydruki
- 1
- Wyświetlenia
- 1942
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A one way bearing to prevent brake torque on the motor drive.
I have two options here, one is a separate gear from bearing ( in case you want to keep your existing gear ) and another is an integrated gear and bearing setup. You will need to repair the gear case in your slicer, doesn't take very long. Works pretty well as it prevents the spools from skipping and hopping when you stop the motor. pay attention to the orientation of the core piece as that determines the bearing directions. Please test it and leave your feedback. Thank you!