Spiral Magic Wand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got my inspiration from Harry Potter props and created a magic wand with my own twist (pun not intended).
- Ocena
- 4,875 / 5
- Polubienia
- 196
- Pobrania
- 1972
- Wydruki
- 18
- Wyświetlenia
- 5983
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
After printing out some pre-made wands from Harry Potter movies, I decided to create my own design. I tried making it as printable as possible - so there is a nice spot in the middle where you can slice it in half and then print those halves (cut facing down) without any supports.
I included the model for the whole wand, as well as files for the cut version, including connecting pin. If printing the cut version, no supports are necessary, but I would recommend using brims, because the bottom area is very small due to the hole for pin.
The pre-sliced file is what I used for my Prusa MK3.
As for post processing - I glued the two parts together and then used simple brown acrylic paint to cover the whole thing in a uniform color. Then I used black paint wash to add depth, and lighter whitish hue with dry brush to achieve the “weared” look.
Both these techniques were showed on the Prusa youtube channel: