SKR 1.4 Case for PRUSA I3 Frames
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electronics box for Prusa MK2S and MK2.5S clones that use SKR 1.4 boards
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 204
- Wydruki
- 2
- Wyświetlenia
- 1568
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
2021-05-29 Update:
- Added hinges and mounts for Bear upgrade frame
2021-04-10 Update:
- I have created an additional design to house typical 25A mosfet board, the spacing between the screwholes are 4,25mm and 5,25mm
- Modified the base version also, moved the heatbed cable holder lower to fit better with the SKR 1.4 board and replaced the MK2.5S cable holder design with the MK2S older one, as it is easier to print and does the job just as well.
On both designes I have adjusted the USB - SD-CARD port cutouts, also added a cutout for the ESP-01s wifi module Remix of theNOAMi3 SKR 1.3 case for the Prusa i3MK2S andMK2.5 frames.
It is resized to fit the SKR 1.4 board, there is 0.2mm difference in the screw hole spacing for the board mounting
For this you need to print the cable clips from the MK2.5 repo:
https://github.com/prusa3d/Original-Prusa-i3/blob/MK2.5/Printed-Parts/stl/Rambo-extruder-cable-clip.stl
https://github.com/prusa3d/Original-Prusa-i3/blob/MK2.5/Printed-Parts/stl/Rambo-heatbed-cable-clip.stl
Please check out also NOAMi3 github project, its actually awesome stuff if you are into building an i3 clone:
https://github.com/numberformat/noami3
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20
Filament:
Sunlu PETG Gray
Category: 3D Printer Parts