Complete External Case for BIGTREETECH SKR Mini E3 V3.0 Control Board +TFT35 E3 V3.0.1 Touch Screen + Meanwell Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got sick of opening up the flimsy case of my printer so I decided to make an all-in-one external case for this bundle…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 161
- Wydruki
- 0
- Wyświetlenia
- 1416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Got sick of opening up the flimsy case of my printer so I decided to make an all-in-one external case for this bundle of components that works great from Amazon: https://www.amazon.com/gp/product/B09MYT45BQ
I added the power supply and a couple fans that were originally in the printer to really push the air through.
Not as pretty as it could be, ports could be labelled, standoffs could have smaller holes for screw pilots, and the case should have a better way top hold the two parts together.
Remixes welcome!
Notes:
My printer was able to do the horizontal bridges without supports, you may need them for your printer.
FreeCAD plans now included.
Category: 3D Printer Parts