1 / 8
Motherboard adapter Robin Pro V1 to BigTreeTech SKR-Pro V1.2 (for JGMaker Artist-D Pro) — zdjęcie 1
1 / 8

Motherboard adapter Robin Pro V1 to BigTreeTech SKR-Pro V1.2 (for JGMaker Artist-D Pro)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two parts, one screws into the chassis (in my case, of a JGMaker Artist-D Pro) in the Robin Pro V1.0 holes, then the…

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Two parts, one screws into the chassis (in my case, of a JGMaker Artist-D Pro) in the Robin Pro V1.0 holes, then the upper part screws into the lower part and provides mounting holes for the BTT SKR-Pro-V1.2. Upper part also includes mounting posts for the existing Artist-D cooling fan that is not pointing at the motherboard [?] to make it blow directly on the stepper drivers (where cooling is needed).

Note that there are indentations and holes in the plates to allow for existing mounting posts on the underside of the Artist-D Pro chassis, and a hole to allow the lower board to be removed from the chassis without removing the upper board.

The board alignment was designed to make it so that the BTT ports would align with the ports on the Robin, but you will need to clear some space (I just cut with a Dremel cut-off saw) vertically.

Notes:

I make no warranties as to the quality of the boards.  I was not impressed.

More infill makes for a more rigid board, but not really necessary.

Category: 3D Printer Parts

Tagi