Begode Extreme EUC Kickstand Spacer and Airtag Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to add some height to the stock kickstand, and also provides room for an airtag as well.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock kickstand on the Begode Extreme isn't quite tall enough which means the metal mudguard hits the ground when you put the EUC on the stand. This is a simple spacer to add a bit of thickness which keeps the mudguard from touching the ground.
There's also space for an airtag or similar device. I use Eufy SmartTrack Links; but either device will fit.
The stock kickstand nubs are reused. The m4x10 bolts need to be replaced with longer m4x30.
I printed in PLA with 4 walls, 4 bottoms, 4 tops with 35% infill.