Oven kickboard kickplate clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Both the clips broke that held the kickboard/kickplate onto the legs on my oven. Nothing around to suit a 57mm leg so…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Both the clips broke that held the kickboard/kickplate onto the legs on my oven. Nothing around to suit a 57mm leg so I drew one up. It's a little bit beefier than the original clip, but works perfectly as a replacement.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
200
Infill:
20
Filament:
[
Any PLA or PETG ](http://www.amazon.com/s?url=search-alias&field-keywords=Any+PLA+or+PETG&tag=thingiverse09-20) Any
Notes:
Supports required, best printed lying down on the largest face. There is very little stress on the clip once on, PLA is fine, PETG if you want something that bit stronger.
Used the wonderful Onshape to design this.
Category: Replacement Parts