BMW e36 Sunroof Motor Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These things are like $140 on FCP Euro now!!! Print one instead.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 685
- Wydruki
- 0
- Wyświetlenia
- 3338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
These things are like $140 on FCP Euro now!!! If you've ever had to remove your sunroof motor cover, you've likely had clips flying all over the place. I tried to repair mine several times. It didn't work.
This one fits a coupe. It's a snug fit and mounts only at the front and rear - I couldn't get side clips to work, they just broke off like the regular e36 one did.
This can easily be wrapped with fabric like the original one as well.
I think different body styles may have different covers, so it may not work on a vert or a sedan. 2 versions are uploaded - one with a hole for the switch, one without. My sunroof is absolutely busted, so the pictured version is the "without switch" one.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Filament:
why is this a required field PETG
Notes:
Print flat side down. Support only on the lip overhang. PETG or other higher heat filament recommended, last time I did a car part in PLA it melted.
Category: Automotive