BMW e36 Center Vent Gauge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement center vent for BMW e36
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 807
- Wydruki
- 1
- Wyświetlenia
- 5865
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Replacement center vent for BMW e36 in the following configurations:
- Blank plate
- Vent only
- 1 52mm gauge
- 2 52mm gauges
- 3 52mm gauges
- 1 60mm gauge
- 2 60mm gauges
I have only printed the 2 52mm gauge version. All of them should work, but I'm not positive on the 3 52mm gauge one. I used a ziptie on the shorter mounting tab to the screw hole on the top of the radio to pull the left end in a little, otherwise it sticks out a bit.
PLA will melt in the sun. I printed in PETG and finished it off with suede flocking and it's been fine.
There's a .3mf file in case edits need to be made. The model is pretty hacked together, but hey, it prints!
Thanks to https://www.thingiverse.com/vague_badger/designs for the original design that I based this off of.
Category: Automotive