Paint bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paint bottle holder for Mr. Hobby 10ml and 15ml paints. Tamiya paint bottles should also fit
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
The holder consists of 2 parts, which need to be glued together with brackets and bowties for additional strength. Each row needs:
3x Backside_bracket;
1x Bottom_bracket;
2x Backside_Bowtie;
2x Bottom_bowtie.
These rows can be stacked on and glued together. I also included a top row finisher (Top_Paint_holder_LEFT_v1.0, Top_Paint_holder_RIGHT_v1.0) with a small handle to pick up the whole assembly. I would not recommend stacking more than 3 rows as the structure can topple easily without additional supports.
For the print I used 0.6 nozzle and black PETG.