Bambu Lab X1 Display Shield with Touchpen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu Lab X1C/X1E display shield with holder for ~9mm touchpens.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
Display shield for Bambu Lab X1/X1C/X1E with integrated touchpen holder (with a diameter of about 9mm).
The inner diameter of the holder is 9.7mm because I noticed that nearly all of them have really big tolerances.
No support needed.
The Shield snaps onto the display and fits quite tight, just use a bit of pressure. For me it worked best to put on the left side first.
You may also scale up the model by .5% or 1% in all dimensions …
The 3mf file contains a pre-colored logo. But you can also print in single color.