Stand for 35mm paints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular paint stand designed for 35mm diameter paint bottles.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A larger version of my 25mm paint stand
Features:
- Different versions of the parts so you can customize it for your needs.
- Relatively short print times.
- Assembly with little to no glue.
- Small overall size.
Before you start printing choose a Horizontal for how many paint tubes across you want for your stand (5 pictured), and a Vertical for how high you want (2 pictured).
You will need a Horizontal plate for each layer high you want and one corresponding Support. If built for 5 wide or less only 2 Verticals are needed, for 6 or greater you will need 3.
Note:
These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.
Assembly
All connections are press fit, but if they are loose use a few drops of super glue.