Ender 3 Cable Chain below Y 20x10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Running a 20x10 cable chain(cheap amazon one) you can use this to run to your electronics board in the back.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I am running my electronics outside an enclosure, I have a 20x10 cable chain. I am running this (printed with CF/PETG) as a way to use the extra cable chain I have to run all those misc cables such as Dual Z motor, Z endstop, Y motor/endstop, and I forget what else.
sorry for the bad picture, the model is updated with a 15 degree angle so it comes closer to my additional cable chain mounting for direct drive enders with this. If you want to run your psu/electronics box outside of the enclosure and away from the heated bed at least, this works well. Instructions, good luck bolting on the front and side bolt, I have an area to loop in the cables - ***Screw on the end of the cable chain beforehand **** - put on rest of cable chain, enjoy a cleaner situation.