"Biggie Smalls" Filament Spool Rollers for Huge and Tiny Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple spool holder rollers to handle both the biggest and smallest reels.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I needed some rollers to put the smallest and the biggest spools in a narrow drybox.
(Smallest = 200mm Diameter, 35mm width, Inland Brand)
(Largest = 300mm Diameter, 100mm wide Stratasys)
Uses R12 bearings, which were really cheap ones I had laying around. Like, a dollar a bearing cheap.
No supports needed, print solid or any infill %. I used PETG and would recommend that, PLA is probably fine.
The two halves press together.
Print two of each.
UPDATE: kind user @L4s3rf4c3 pointed out the files didn't match the pics. Fixed.