1 / 2
Prym Sport & Camping Druckknopf Adapter / Press Fastener 390201 / 390202 / 390230 / 390200 — zdjęcie 1
1 / 2

Prym Sport & Camping Druckknopf Adapter / Press Fastener 390201 / 390202 / 390230 / 390200

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An Adapter for the Prym 390900 Vario Zange / Pliers used with the Sport & Camping Press Fasteners

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
344
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This additional tool for the Prym 390900 Vario Zange / Pliers is used to better support the back end of the male part for the Pyrm buttons when used with very thick materials.

The standard tool uses one piece for the push buttons and for the flat disc. This results in the back disc to bow back. I don't like the look at it is not as secure when you put the button through a 2,5mm piece of leather .

This adapter requires an M5 washer with  diameter of around 14,70mm. I tried making this part without a washer but the forces are too high. PLA will compress even when printed at 100% infill.

 

The image on this page shows the buttons made with the original Prym tool in the front. It is really difficult to see the difference. I think you can see it clearly in the video below. We are talking about a millimeter difference AT MOST. So keep using the original part if you don't want to mess around. It still works.

Details about the part: https://www.youtube.com/watch?v=JY91vu3G0WM&t=631s

 

Print Settings

  • 100% Infill
  • Support on built plate
  • Orientation, center pin down with the cup pointing up

 

This tool is public domain. Solid Edge Community Edition 2024 PAR file and STEP provided (Prym Knöpfe Buttons Model Files.zip). Enjoy!

Tagi