Ahoy DTU Case for Hoymiles Inverters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the components of a Ahoy DTU. See the Ahoy DTU Project Page on Github: https://github.com/lumapu/ahoy
- Ocena
- 4,333 / 5
- Polubienia
- 0
- Pobrania
- 191
- Wydruki
- 4
- Wyświetlenia
- 1104
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for the components of a Ahoy DTU. See the Ahoy DTU Project Page on Github:
https://github.com/lumapu/ahoy
The Ahoy DTU allows for communicating with a bunch of Hoymiles Microinverters for small sized Solar Systems. It is even possible to set the power limit of the inverter. The components cost around 6€ compared to the equivalent commercial product - the Hoymiles DTU Pro - that cost around 260€.
The case takes an
WeMos D1 Mini with USB - C connector,
e.g. https://www.aliexpress.com/item/32831353752.html
and an
NRF24L01+ module,
e.g. https://www.aliexpress.com/item/32280738812.html
These two modules worked for me. However, please read the notes on the Github page about fake modules!
There is plenty of space in between the modules for the cables. The reset button is exposed and can be operated. The LED of the WeMos D1 Mini is hidden and cannot be seen easily from the outside. Mounting the case by 2 screws or a cable tie is possible.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
Please rotate the model so that it lays flat on the larger front/back sides.
There is support needed at the reset button recess. It is easy to remove there.
Category: Electronics