G-clamp with hook and eye L10-25
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple small g-clamp to be used as hook to hang towels, etc. The eye has a diagonal slit for inserting ropes, etc.…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 328
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple small g-clamp to be used as hook to hang towels, etc.
The eye has a diagonal slit for inserting ropes, etc.
Clamping length: 10 - 25mm.
The screw is flattened and can be printed laying on its side for increased strength.
A similar g-clamp for clamping length 0-14mm can be found here: https://www.thingiverse.com/thing:3771078
This general design was inspired by: https://www.thingiverse.com/thing:1673030
Print Settings
Printer:
Anycubic i3 Mega
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament:
Basicfil PLA
Notes:
PLA is prone to creep in hot conditions (summer). The clamp could loose its clamping force when mounted for a longer period of time. In this case, print it in PETG.
The screw is printed on its flat side.No supports needed.
Category: Household