Raspberry Pi 19" 1U Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1U Rack Mount for the Raspberry Pi Model B for 19" Server/Networking Racks.
- Ocena
- 4,5 / 5
- Polubienia
- 34
- Pobrania
- 160
- Wydruki
- 2
- Wyświetlenia
- 2514
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
The front panel is designed with a split configuration, divided into two halves, making it possible to print on smaller printers such as the Ender 3. There are three available versions of these front halves: one with a single cutout, another with two cutouts, and a third one that's blank with no cutouts. These two halves can be fastened together using two M4 screws and nuts. The Pi's are mounted onto dedicated holder frames using M2.5 standoffs. These holder frames are then affixed to the front plate using two M4 screws and nuts.
Hardware needed:
- M4x16 or M4x20 Screws
- M4 Nuts
- M2.5 4-6mm Standoff Screws
- M2.5 Screws
- M2.5 Nuts