SteelSeries Nimbus Phone Mount (iPhone 6 Plus, 7 Plus, 8 Plus, XS Max, 11 Pro Max + Case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a phone mount for the SteelSeries Nimbus MFi controller for iOS. I had a commercial one I bought for an XBOX…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is a phone mount for the SteelSeries Nimbus MFi controller for iOS. I had a commercial one I bought for an XBOX One controller that worked pretty well, but it wore out after awhile of taking it on and off and blocked the switches on the back. This one give you access to the switches and all the buttons (but not the charge port), and is easily removed when using PETG. This should work on most iPhone PLUS/MAX size phones with the standard Apple Case, or similar.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50%
Filament:
eSUN PETG
Notes:
I set the support Z-distance to 0.1 to make sure to get a good smooth finish and the supports were relatively easy to remove. I used PETG because it flexes nicely. I also had best results when printing with a brim because the supports tend to need help sticking down when almost nothing is touching the bed.
Designed in Fusion 360
Category: Mobile Phone