Switch Sheets Reminder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I continue to forget to set my sheet from the PEI to the textured steel sheet, so this reminder helps me to not forget.
- Ocena
- 4,5 / 5
- Polubienia
- 17
- Pobrania
- 58
- Wydruki
- 2
- Wyświetlenia
- 1103
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a super simple reminder that I use to help me remember to change the printer from the PEI to the textured sheet or vice versa.
I've been using the steel sheet holders from Whity: https://www.prusaprinters.org/prints/51462-expandable-steel-sheet-holder-mk-mini
to hold my sheets, and I have completely mangled my PEI sheet now since I forget to switch it on the printer from the smooth to the textured.
This little print took about 10 minutes to make in Fusion, and I'm hoping that if I put one of the clips on all the sheets in storage, when I pull them out I make sure that I change the setting before I take the little clip off the sheet.
The textured sheets are about 0.02", and the PEI is 0.05", so rather than make a whole new STL from fusion I just added a modifier to open a gap further on the PEI version.