1 / 6
DDX V3 5015 Fan Shroud/Duct for Ender 6 — zdjęcie 1
1 / 6

DDX V3 5015 Fan Shroud/Duct for Ender 6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A redesigned version of Bondtech's DDX V3 5015 Fan Shroud/Duct for Ender 6

Ocena
4 / 5
Polubienia
12
Pobrania
101
Wydruki
0
Wyświetlenia
889
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Update 8/1/2025: V47 has the same hole spacing as the original. It also has a new internal rib to try to reduce warping from the heated bed.

Update 3/10/2024: V43T has the same clearances as the original Bondtech version and should fit better if you were having problems with the other versions.

Update 3/1/2024: v43 was added with a second hole for attaching the fan to the duct, m4x20 will work for attaching the fan to the duct. Don't over tighten, or the plastic will strip. 

This is a tri-duct fan duct for the Bondtech DDX V3. This duct was mainly designed to fit the Ender 6, but it should fit other printers. Depending on the fan you have, you will either need a m3 nut and bolt or just a m4 bolt.

Print Instructions

  • Organic supports
  • 50% Gyroid infill
  • 0.2mm layer height
  • Print in ABS or ASA

Tagi